CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-41T15 No. 326 Subject: CRT (Green) Sub Doesn't Fit Date: May 6, 1997 Symptom: (****) The Green CRT sub is a little longer and thereby will not fit into this model. Solution: The Green CRT was sub to part number 8-733-501-05. This tube is slightly longer then the original and therefore will not fit into the KP-41T15, within the serial number range below,. Before ordering the Green CRT please check the units serial number for the proper tube to be ordered. See the chart below. Note: The Red and Blue CRT are not affected. Reference Model Serial No. Part Number Green CRT KP-41T15 9000001-9015800 8-736-078-05 Green CRT KP-41T15 9015801 and above 8-733-501-05 Reference: Yamakami PRINTED IN USA xxx Products Service Bulletin No. xxx ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-13M10 No. 327 Subject: Part Number Correction - Reference No. T551, Date: April 14, 1997 Horizontal Drive Transformer Symptom: (**) The part number listed on page 45 of the Service Manual for Ref # T551, Horizontal Drive Transformer, is incorrect. Solution: Please note the correct part number as shown below. REF DESCRIPTION PART NUMBER INCORRECT CORRECT T551 HORIZONTAL DRIVE TRANSFORMER 1-437-195-11 1-437-210-11 Reference: FPR-S0524 PRINTED IN USA PRINTED ON RECYCLED PAPER ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-46V25, KP-53V25, KP-61V25 No. 328 Subject: Part Number Missing - Reference No. , Hinge Date: May 6, 1997 Symptom: (**) The part number for Ref # A and B, Hinge, which is shown on page 95 of the Service Manual, is not listed in the parts list. Solution: Please add the following part number to the Service Manual. REF DESCRIPTION PART NUMBER A UPPER HINGE 4-048-636-01 B LOWER HINGE 4-048-635-01 Reference: KCP PRINTED IN USA ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-27S20, KV-27S25, KV-27S35, KV-27V20 No. 329R1 KV-27V25, KV-27V35, KV-32S20, KV-32S25 KV-32S35, KV-32TW25, KV-32V25, KV-32V35 KV-3500, KV-35S26, KV-35V36, KV-35V46 KV-35V75, KV-35V76 Subject: New Closed Caption IC Date: December 10, 1997 Symptom: (A22) No Closed Caption on premium channels. Solution: If the customer experiences the symptom above and the Closed Caption setting are correct, please replace IC001 with the IC below. Ref Former New Part Number IC-001 CXP85640-004s CXP856P40S-1 T-935-001-61 Note: After replacing the IC–001 go into the Service Mode. Select “CRIW” and change the setting from 15 to 3. This IC contains three additional adjustments. They are used in AA-2D chassis. They have nothing to do with Closed Captioning. These adjustments are: LBLK=7 Left Side Blanking RBLK=7 Right Side Blanking HBSWO=0 Turns Blanking On ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-61XBR48 No. 330 Subject: Speaker Grill P/N Change Date: May 23, 1997 Symptom: (****) Speaker grill is screw on type. There is no part number given for these screw on grills. Solution: Older version of this model used a screw on type speaker grill. The part numbers for these grills are listed below Ref Description Part Number Serial number Range 60 Screw on left speaker grill X-4033-005-1 Before 9006250 63 Screw on right speaker grill X-4033-006-1 Before 9006250 60 and 63 Push On type speaker grill Both Left and right X-4033-876-1 9006251 and beyond Note: The main speaker grill ref. 58 were always the Push On type. P/N X-4033-008-1 Reference: Steve Seder PRINTED IN USA ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-53XBR45, KP-61XBR48 No. 331 Subject: Part Number for Diodes D1214 & D1215 on the Date: June 11, 1997 GB Board Symptom: (****) Service Manual does not show, on the GB Board, or list diodes D1214 & D1215 on the Schematic or Parts List. Solution: Please add the information below to your Service Manual. Reference Description Part Number No. D-1214 RD27F-T7B2 8-719-119-17 D-1215 RD27F-T7B2 8-719-119-17 Reference: FPR-SO861 PRINTED IN USA ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-20V60 No. 332 Subject: Stereo Channels Reversed Using Headphones Date: July 15, 1997 Symptom: (156) Right and Left channels are reversed when using headphones. Stereo is OK when using the internal speakers. Solution: If the customer should complain about the above symptom please perform the following circuit change. Remove resistors R491 and R492 on the “A” Board. Either replace or extend the leads on the existing ones. Re-insert R491 into point A. Insert the other end into point C. Re-insert R492 into point B. Insert the other end into point D. Note: This circuit change has been put into production starting with serial number 8014870. Reference: FPR-S0873-SO873 PRINTED IN USA ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-27XBR45, KV-32XBR45, KV-32XBR85 No. 333 Subject: Part Number Correction For the C Board Date: June 24, 1997 Complete Symptom: (***) The part number listed in the Service Manual Supplement-1, under Section 6 Electrical parts List, for the C Board Complete, is incorrect. Solution: Please note the correct part number as shown below. REF DESCRIPTION PART NUMBER INCORRECT CORRECT C BOARD COMPLETE A-1331-436-B A-1331-436-A Reference: J. Gwinn PRINTED IN USA ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-32S22 No. 334 Subject: Part Number Correction, Reference No. 52, Date: July 15, 1997 Beznet Symptom: (**) The part number listed on page 52 of the Service Manual for Ref # 52, Beznet, is incorrect. Solution: Please note the correct part number as shown below. REF DESCRIPTION PART NUMBER INCORRECT CORRECT 52 BEZNET 4-059-287-01 4-058-287-01 Reference: FPR-S0998 PRINTED IN USA ************************************************************************ S Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-48S35 No. 336 Subject: Contrast Screen Replacement Date: November 13, 1997 Symptom: (***) If the contrast screen should need to be replaced, due to surface scratches, etc. it may not fit. There are two different sizes of screens and holders for each of them. SOLUTION: Please replace the contrast screen using the SCN-48X2 Contrast Screen Kit. Replace using the entire kit parts and not just the contrast screen. Applicable Serial Numbers: All Reference: TVA 97002 PRINTED IN USA PRINTED ON RECYCLED PAPER ************************************************************************ S Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-13VM30, KV-13VM31 No. 337 KV-20VM30, KV-20VM31 Subject: Drum Part Number is Incorrect Date: November 13, 1997 Symptom: (***) The part number for the Drum Assembly, Ref. A-01, in the Service Manual, is incorrect. Solution: Please order the complete Drum Assembly using the part number below. Note: The upper and lower drum can not be ordered separately. The complete drum must be replaced. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER A-01 DRUM ASS’Y 9-908-441-01 DRUM ASS’Y COMPLETE 9-939-417-01 Reference: TVA, 1996-15 PRINTED IN USA PRINTED ON RECYCLED PAPER ************************************************************************ CONFIDENTIAL Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-13M10, KV-13TR28, KV-13TR29, KV-20M10, No. 339R2 KV-20S10, KV-20S11, KV-20TS29, KV-27V20 KV-27V22, KV-27V25, KV-27V35, KV-32S22 KV-32S26, KV-32TW26, KV-32V26, KV-32V36 KV-32XBR48, KV-35S26, KV-35V35, KV-35V36 KV-35V45, KV-35V76, KV-35XBR48 KV-35XBR88 Subject: New Tuner Replacement Date: June 1, 1998 Symptom: (1310) New replacement tuner has five ground lugs compared to four on the original tuner. Board does not have a hole to accommodate the fifth lug. Solution: When replacing the tuner with the new replacement tuner it will become necessary to remove the fifth lug, located in the middle of the tuner. Description Former Part Number New Part Number Tuner (BTF-WA401) 8-598-340-10 8-598-254-51 Tuner(BTF-WA402) 8-598-254-00 8-598-254-51 Tuner (BTF-WA403) 8-598-269-00 8-598-340-20 Tuner (BTF-WA404) 8-598-340-00 8-598-340-20 Reference: SD Ser Bul 1996-14 PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-41T15, KP-41T35, KP-46S15, KP-53S15 No. 340 KP-46V25, KP-46V45, KP-53V25, KP-53V35 KP-53V45, KP-53XBR45, KP-61V25, KP-61V45 KP-61XBR48 Subject: New Micro for Registration Jig Date: December 10, 1997 Symptom: (****) The RA-2 chassis can not be adjusted using the Registration Jig. (T-9985-723-1) SOLUTION: There has been an upgrade in the program of the micro used in the registration jig. This upgrade will allow you to use this jig on the RA-2 chassis. The new 4.2 version software reads the model ID. It will determine whether the set is a RA-1, RA-1 XBR, or RA-2 chassis automatically. All three chassis have different locations for the registration data. Therefore the position of the RA1/XBR switch does not matter with the version 4.2 software. The one draw back is that the set must be RA-1, RA-1/XBR, or RA-2 models produced in the USA for use in the USA only. Sets built in other countries may not have model IDs built into them. NOTE: An operating procedure will be included with the new micro. RA-1 TOUCH-UP JIG OPERATING INFORMATION I. General Description The RA-1 touch-up jig can be used to adjust sub-deflection registration on the RA-1, XBR RA1, and RA-2 chassis. The jig communicates to the registration microprocessor and the registration non-volatile memory through the IIC serial buss. The jig can be powered from a 9V DC battery or and external 9V dc adapter (center positive). II. General Operating Procedure 1. Connect the RA-1 touch-up jig to a 9VDC battery or an external 9V dc 100mA wall adapter. Turn the jig on with the on/off switch. The red horizontal led will light indicating that there is power to the jig. Cont. Reference: Pitt PRINTED IN USA TV Products Service Bulletin No. 340 2. Plug the television set to be registered into an AC outlet and turn it on. Connect a signal generator to the televisions and set it to a cross hatch pattern or other suitable patter for conducting registration adjustment. Select the proper video source or RF channel so that the cross hatch pattern is displayed on the screen. 3. Perform a test reset on the television. This resets the user convergence adjustments for red and blue centers to 0. This is necessary because the jig does not read the user convergence adjustment. It just assumes that it is 0. If the user convergence adjustment was on one end of the range, it would limit the users range after the registration adjustment was complete. A test reset can be performed by pressing 8 enter in service mode. 4. Turn the jig on before connecting it to the television. This insures the maximum isolation between the jig and the television. CAUTION: Connecting and disconnecting the jig to the television with the power off can cause errors in the registration refresh cycle. They can be corrected by disconnecting the jig and cycling the AC power to the television. 5. Connect the serial buss cable between the jig and the television. The rear cover of the television must be removed in order to connect the serial buss cable to the television. 6. REVISED 8/97 - The version 4.2 software reads the set’s model ID and selects the proper slave address for the registration data. Therefore, the position of the RA1/XBR switch does not matter on the version 4.2 software. The set does however have to be a set that was produced at the factory where the model ID is written. Engineering sample sets without a serial number or sets produced in other countries may not work with this jig. 7. Press the read switch. The jig first reads the position of the interrupt switch. If the switch is in the non­interrupt position, the jig will wait until the switch is placed in the interrupt position. It then reads the television’s existing registration data into the jig. The center led will light after the registration data is read into the jig. 8. You can now adjust red horizontal center or select any of possible 90 adjustments. Adjustments can be made by pressing the plus key(+) to move right or up or press the minus(-) key to move down or to the left. 9. Ifyou are satisfied with your adjustments you can press the save key and the data will be saved to the television’s non volatile memory. The entire save routine takes 2-3 seconds. 10. Ifyou are not satisfied with the adjustment you do not have to press the save key and whatever adjustments you have made will not be saved. 11. Before disconnecting the IIC serial buss cable, it is recommended to move the interrupt switch to the non­interrupt position. This releases interrupt line so that is will not bounce when disconnecting the jig from the television. III. Use of the Interrupt Switch The interrupt switch is used to drive the interrupt line to the television low. When the television is interrupted, you can not change channels, video sources, volume, etc. The television is effectively disabled from user control. Therefore it is recommended to have the video source selected and on the screen before connecting the touch-up jig to the television and pressing the read key. The interrupt switch can be placed in the non­interrupt position after the adjustment procedure has begun. It will cause the following: 1. The interrupt line to the television is released and the interrupt line returns to it normal high condition (+5V DC). Cont. TV Products Service Bulletin No. 340 2. Any time the interrupt line is released the television does a complete NVM update. This means that the television reads the registration NVM data and refreshes the screen. CAUTION: Because the television does a memory refresh after the interrupt line is released, you must save your registration adjustments, if you want to, before you release the interrupt. If you don’t your registration adjustments will be lost and the television will return to its pre-adjusted condition. 3. After the interrupt line has been released you can change channels, video source, go into service mode, etc... The set operates in its normal non-interrupted condition. 4. You then have the following two options: a. You can return the interrupt switch to the interrupt position if you want to keep adjusting. b. Or you can disconnect the serial cable from the television and discontinue you registration adjustment. If you return the interrupt switch to the interrupt position the jig will do the following: • Delay for approximately 3 seconds. This delay is necessary because the television’s complete refresh cycle takes this long. • Re-read the registration data from the television. The jig does not know if you saved the data before you released the interrupt line. Therefore it re-reads the data back just in case some changes were made and the data was not saved. This insures the jig’s registration data is the same as the television’s data. • Light the red horizontal center led. This is the common starting point for beginning registration. IV. Use of the Read Switch The primary function of the read switch is the initial reading of the registration data from the television. It can however be used to re-read the registration data back from the television after you have begun adjusting . This could be useful in a case where you began adjusting registration and you do not like your adjustments. You can re-read the data and start again from the original condition. Pressing the read key does the following: 1. Releases the interrupt line and allows the television to do an NVM refresh. This is necessary in order to return the screen to it original condition. 2. Delay for 3 seconds. This is done because a complete refresh after an interrupt takes 2-3 seconds. 3. Drive the interrupt line low. 4. Re-read all the registration data back from the television set into the jig. 5. Light the red horizontal center LEDs. This is the common starting point for registration adjustment. ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-27V22, KV-27V26, KV-27V36, KV-32V26, No. 341 KV-32V36, KV-35V36, KV-35V76 Subject: Preventing Damage to A-board During Date: February 6, 1998 Servicing. Symptom: (**) The rear portion of the A-board extends beyond the circuit board support rails of the front cabinet. Consequently, cracked or broken solder joints, lifted lands, or board breakage may occur if pressure is applied to the rear portion of the A-board during servicing. This is especially true when installing the UV-board onto the A-board, which may result in the aforementioned damage in the area of the tuner. Solution: Prevent A-board damage by carefully handling the board during servicing. Be sure to support the A-board from the underside when installing the UV board to prevent any undue stressing of the A-board. Reference: J. Mijares E-Mail PRINTED IN USA AUTOFLAGGED -YES ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: Subject: Symptom: (1353) Solution: KV-9PT50, KV-9PT60 No. 342 Vertical Jitter; R504 and/or R521 Damaged. Date: February 6, 1998 The picture exhibits vertical jitter. This problem may occur if R504 and/or R521 are damaged. If the above symptom is found to be caused by damaged R504 and/or R521 on the A­board, replace both resistors with the parts shown below. Be sure to secure the resistors with UL approved RTV. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER R504, R521 RESISTOR, 10K, SURFACE MOUNT, 1/10 W 1-216-073-00 RESISTOR, 10K, LEAD TYPE, . W 1-249-429-11 Reference: C. Verdugo/STE-II ENG PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: Subject: Symptom: (122) Solution: KV-35V35, KV-35V75 No. 343 S Link Miss-Operation Date: March 4, 1998 If using the S Link function the TV should switch back to the TV mode, when the VCR is stopped, the following changes will be required. The following parts will need to be added, deleted, or value changed. This changed was instituted in production on serial numbers started from 9009603 and up Reference Description Former Description New Part Number IC001 CXP85640-004S CXP85640-005S (A board) 8-752-874-16 R1937 10K Metal Glazed 1/10w 2.2K (AV Board) Metal Glazed 1/10w 1-216-057-00 R1936 22K Metal Glaze 1/10w 8.2K (AV Board) Metal Glazed 1/10w 1-216-071-00 R2901 22K Metal Glaze 1/10w 12K (AV Board) Metal Glaze 1/10w 1-216-075-00 R922/R923 1K Delete (UV Board) D910/D909 MTZJ-T-77-6.2 RD6.2ES-T1B Delete (UV Board) R925/R926 3.3K (UV Board) Metal Glaze 1/10w 1-216-304-11 Cont. Reference: Fax pitt PRINTED IN USA TV Products Service Bulletin No. 343 ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-41T35, KP-46C36, KP-48S35, KP-48V45, No. 344 KP-53S35, KP-53V45, KP-61S35, KP-61V45 Subject: Preventing Damage to PS601 and PS602. Date: March 4, 1998 Symptom: (1111) The set is dead, and PS601 and/or PS602 is open. The open may have been caused by excessive in-rush current when the set was powered on. If this is the case, C815, C858, C889, and C897 should be examined to determine their value, and if they are found to be 1,000 uF they should be changed to 470 uF. Solution: Check the value of C815 on the G board. If it is 1,000 uF the other capacitors mentioned above should also be 1,000 uF. Change them to 470 uF as listed below. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER C815, CAPACITOR, 1-126-942-61 CAPACITOR, 1-126-941-11 C858, 1,000 uF 470 uF/25V C889, C897 Continued) Reference: S. Seder E-Mail PRINTED IN USA TV Products Service Bulletin No.344 ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-27V26 No. 345 Subject: Part Number Correction - Reference No. 51, Date: March 4, 1998 Beznet Assy Symptom: (**) The part number listed on page 60 of the Service Manual for Ref # 51, Beznet Assy, is incorrect. Solution: Please note the correct part number as shown below. REF DESCRIPTION PART NUMBER INCORRECT CORRECT 51 BEZNET ASSY X-4033-594-1 X-403-459-41 Reference: FPR-S1392 PRINTED IN USA ************************************************************************ S Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-41T35, KP-46C36, KP-48S35, KP-48V45, No. 346 KP-53S35, KP-53V45, KP-61S35, KP-61V45 Subject: No Sub Registration Due to Open PS601 or Date: March 5, 1998 PS602 Symptom: (133) After replacing the memory IC007 the +/- 15-volt fuse opens. Solution: The replacement IC does not come with any preset memory settings. Because of this the deflection current could rise causing the fuse to open. In order to prevent this please follow the steps below. 1) With the old NVM still on the A board record all service data. Since IC007 is the only NVM in the unit all service data must be reordered. 2) Replace NVM with the new IC. 3) Before powering on set unplug sub deflection connectors on the G board they are CN-801, 802 and CN-803. Color-coded red, white, and black. 4) Power on set and write all service and registration adjustment information into the various locations from the data previously recorded. ***NOTE*** As you do this you will not see the registration move. This is ok and expected. 5) After data has been saved by MUTE + ENTER power off the set. Reconnect Sub Deflection connectors, CN801, 802, and CN803. 6) Power on set and perform a convergence touch up. Reference: R. Gerlach PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-61XBR48 No. 347 Subject: Part Number Missing for the Control Panel Date: April 20, 1998 Symptom: (****) The part number for the Control Panel, which is shown on page 107 of the Service Manual, is not listed in the parts list. Solution: Please add the following part number to the Service Manual. Reference: FPR-S1054 PRINTED IN USA ************************************************************************ S Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-41T25, KP-46S15, KP-46S25, KP-46V25, No. 348 KP-46V35 KP-53S15, KP-53S25, KP-53V25, KP-53V35, KP-53XBR45 KP-61V25, KP-61V35, KP-61XBR48 Subject: No Sub Deflection Date: March 5, 1998 Symptom: (133) After replacing the memory IC1005 the +/- 15-volt fuse opens. Solution: The replacement IC does not come with any preset memory settings. Because of this the deflection current could rise causing the fuse to open. In order to prevent this please follow the steps below. 1) With the old NVM still on the M board record all service registration data. 2) Replace NVM with new IC. 3) Before powering on set unplug sub deflection connectors on the D board they are CN1612, 1642 and CN1672. Color-coded red, white, and black. 4) Power on set and write into registration locations data previously recorded. ***NOTE*** As you do this you will not see the registration move. This is ok and expected. 5) After data has been saved by MUTE + ENTER power off the set. Reconnect Sub Deflection connectors, CN1612, 1642 and 1672. 6) Power on set and perform a convergence touch up. Reference: R Gerlach PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-53XBR4CT No. 349 Subject: New Control Panel Ass'y Date: April 10, 1998 Symptom: (****) New Control Panel has been issued to prevent button from sticking. Solution: REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER 15 PANEL ASSY, CONTROL X-4033-777-1 PANEL ASSY, CONTROL X-4033-777-3 For serial numbers up to 9,000,421: Change the Control Panel Ass’y to new one. Remove the 4 spacers from the top of the 4 tact switches on the H1 board. (Vol.-, Vol+, Ch-, Ch+). For serial numbers from 9,000,422: Change the Control Panel Ass’y only. Reference: K. Shibata QA-SP/INY(DC) PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: Subject: Symptom: (****) Solution: KP-41T35 No. 350 Two Types of CRT Used Date: March 31, 1998 The CRT part number listed in the service manual does not match the CRT found in the unit. The mounting bracket is completely different. There are two types of CRT’s used in this model. Looking at the serial number label can identify the two tubes. The tubes are labeled either “18ODLB” or “07MAC” Please use the chart below to identify, which CRT should be ordered. CRT Labeled “07MAC” Labeled “18ODLB” Labeled “18ODLB” Red 8-733-527-05 A-1501-086-A A-1501-251-A Green 8-733-525-05 A-1501-169-A A-1501-252-A Blue 8-733-526-05 A-1501-088-A A-1501-253-A Serial numbers starting with 90XXXXX 91XXXX 91XXXX Note: The tubes labeled 18ODLB are interchangeable. Reference: Pittsburgh/J.Posse PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-32V26, KV32V36 No. 353 Subject: Part Number Missing - Reference No. 123, Date: April 20, 1998 Cover Rear Symptom: (**) The part number for Ref. # 123, Cover Rear, which is shown on page 63 of the Service Manual, only lists the part number for the KV-32V26. Please add the part number below for the KV-32V36 not listed in the parts list. Solution: Please add the following part number to the Service Manual. MODEL REF DESCRIPTION PART NUMBER KV-32V26 123 COVER REAR 4-053-766-11 KV-32V36 123 COVER REAR 4-053-766-01 Reference: S. Kikuchi PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-27S20, KV-27S22, KV-27S25, KV-27S26, No. 354 KV-27S35, KV-27S36, KV-27V20, KV-27V22, KV-27V25, KV-27V26, KV-27V35, KV-27V36, KV-27XBR45, KV-32S12, KV-32S16, KV-32S20, KV-32S22, KV-32S26, KV-32S36, KV-32S25, KV-32S35, KV-32TW26, KV-32TW67, KV-32TW68, KV-32V16, KV-32V25, KV-32V26, KV-32V35, KV-32V36, KV-32XBR100, KV-35S26, KV-35S36, KV-35V35, KV-35V36, KV-35V76, KP-41T15, KP-41T25, KP-46S15, KP-46S25, KP-46V25, KP-46V35, KP-53S15, KP-53S25, KP-53V25, KP-53V35, KP-61V25, KP-61V35, Subject: List of Service Manuals requiring an additional Date: May 4, 1998 Adjustment Manual Symptom: (****) Which Service Manuals have the Adjustment Manual separate List of Models with Separate Adjustment Manuals Model Adjustment Manual P/N Chassis KV-27S20 9-965-811-01 AA-2 KV-27S22 9-965-829-01 AA-2D KV-27S25 9-965-811-01 AA-2 KV-27S26 9-965-829-01 AA-2D KV-27S35 9-965-824-01 AA-2 KV-27S36 9-965-829-01 AA-2D KV-27V20 9-986-816-01 AA-2 KV-27V22 9-965-829-01 AA-2D KV-27V25 9-986-816-01 AA-2 KV-27V26 9-965-829-01 AA-2D KV-27V35 9-986-816-01 AA-2 KV-27V36 9-965-829-01 AA-2D KV-27XBR45 MDR-IF210 9-965-064-01 9-959-113-11 AA-1A KV-32S12 9-965-038-01 AA-1 KV-32S16 9-965-038-01 AA-1 Cont. Reference: scigliano PRINTED IN USA TV Products Service Bulletin No.354 KV-32S20 9-965-811-01 AA-2 KV-32S22 9-965-829-01 AA-2D KV-32S26 9-965-829-01 AA-2D KV-32S36 9-965-829-01 AA-2D KV-32S25 9-965-811-01 AA-2 KV-32S35 9-965-824-01 AA-2 KV-32TW26 9-965-829-01 AA-2D KV-32TW67 9-965-038-01 AA-1 KV-32TW68 9-965-038-01 AA-1 KV-32V16 9-965-038-01 AA-1 KV-32V26 9-965-829-01 AA-2D KV-32V36 9-965-829-01 AA-2D KV-32XBR100 9-965-067-01 DA-1 KV-32V25 9-986-816-01 AA-2 KV-32V35 9-986-816-01 AA-2 KV-35S26 9-965-829-01 AA-2D KV-35S36 9-965-829-01 AA-2D KV-35V35 9-965-821-01 AA-2 KV-35V36 9-965-829-01 AA-2D KV-35V76 9-965-829-01 AA-2D KP-41T15 9-965-042-01 RA-1 KP-41T25 9-965-043-01 RA-1 KP-46S15 9-965-042-01 RA-1 KP-46S25 9-965-043-01 RA-1 KP-46V25 9-965-043-01 RA-1 KP-46V35 9-965-106-01 RA-1 KP-53S15 9-965-042-01 RA-1 KP-53S25 9-965-043-01 RA-1 KP-53V25 9-965-043-01 RA-1 KP-53V35 9-965-106-01 RA-1 KP-61V25 9-965-043-01 RA-1 KP-61V35 9-965-106-01 RA-1 ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KV-27XBR45, KV-32XBR45, KV-32XBR85 No. 355R1 Subject: Sub Woofer Part Numbers Missing from the Date: June 29, 1998 Service Manual Symptom: (****) The Service Manual does not list any part Numbers for the Sub Woofer. Only the entire unit has a part number Solution: Please see the part List below. Reference: FPR-Q2051 PRINTED IN USA ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-41T15, KP-41T25, KP-46S15, KP-46S25 No. 356 KP-46V25, KP-46-V35, KP-53S15, KP-53S25 KP-53V25, KP-53V35, KP-53XBR45, KP-61V25 KP-61V35, KP-61XBR48, KP-46C36, KP-41T35 KP-KP-48S35, KP-48V45, KP-53S35, KP-53S35 KP-53V45, KP-61S35, KP-61V45 Subject: Chassis and CRT Block Removal Fixture for Date: May 18, 1998 RA-1 AND RA-2 Models Symptom: (****) Need an easier way to bring the chassis and CRT in for service, without the cabinet Solution: Service Stay Assembly now available. This will allow for carry in of Chassis and CRT without the cabinet. Only one technician will be needed to remove the chassis and CRT’s for service. NOTE: Because the Red CRT in the RA-2A chassis is rotated 180 degree it is advisable to remove the CR board when transporting the RA-2 chassis. The CR board can become damaged due to the Red [CR] board hitting the sides of the service kit during the transportation from customer house to service station. To avoid CRT damage please removes the CR board when transporting the chassis Cont. Reference: supplement PRINTED IN USA TV Products Service Bulletin No. 356 ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: Subject: Symptom: (832) KV-20V80 No. 357 Picture Either Blips or Blinks Date: June 1, 1998 1. When a VCR is connected to the video inputs of the TV, and both the VCR and TV are on the same channel, and the TV is in the Video mode, the picture will turn ON/OFF (Blinks). 2. When the S Video of the TV is used when the channel or mode is changed the picture will blip and noise will be heard through the speaker. Solution: If these symptoms should occur please perform the following: Serial number range affected 4,000,001 through 4,004,069 USA Canada A400000-400511. 1. Cut out and remove the yellow capacitor between R080 and the capacitor (negative terminal) of C005, on the A Board. See fig. 1 2. Install a capacitor 0.01uf/100v, between the two points of jack J203 as show in fig 2. Add RTV glue under the capacitor. Part Number 1-108-377-00. Fig 1 Cut and remove the capacitor Fig 2 Add 0.01 capacitor between the two points shown on J203. Reference: TVA Eng. PRINTED IN USA AUTOFLAGGED-YES ************************************************************************ Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: Subject: Symptom: (1XXX) Solution: KP-48S65, KP-48S65R No. 358 No Service Manual for the KP-48S65R Date: May 18, 1998 The KP-48S65R is being sold to rental stores. This unit is the same electrically as the KP-48S65. The only difference is the contrast screen comes with this unit whereas the KP-48S65 has it as an option. There will be no Service Manual issued on the KP-48S65R . Below are the part numbers of the screen and brackets that are different then those listed in the Service Manual for the KP-48S65. Description Part Number Screen Holder (S) 4-058-892-01 Screen Holder (L) 4-058-893-01 Screen Holder Cushion N/A Contrast Screen 4-064-651-01 (SCN-48SX2) Adjustment Description Adjustment level Sub-contrast 1.75v (pedestal to peak) NOTE: If for some reason the contrast screen was removed from this model, the remaining two screens would have a “loose” fit. To correct this situation, the contrast screen must be replaced, or the Screen Holder (S) and (L) replaced with the Screens Holders used in the KP-48S65. If the “A” Board is replaced the adjustment for sub-contrast will need to be readjusted to 1.75v. This is due to the addition of the contrast screen. The contrast level will need to be adjusted due to the contrast screen. Reference: Seder PRINTED IN USA ************************************************************************ . Sony Service Company Service Bulletin National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products CSV-1 Model: KP-41T35, KP-41T65, KP-43T70, KP-43T75 No. 359R7 KP-46C36, KP-46C65, KP-46C70, KP-48S35 KP-48S65, KP-48S65R, KP-48S70, KP-48S72R KP-48S75, KP-48V45, KP-48V75, KP-48V80 KP-48V85, KP-53HS10, KP-53N74, KP-53N77 KP-53S35, KP-53S65, KP-53S70, KP-53S75 KP-53V45, KP-53V75, KP-53V80, KP-53V85 KP-53XBR45, KP-53XBR200, KP-53XBR300 KP-57XBR10W, KP-61HS10, KP-61S70 KP-61S35, KP-61S65, KP-61S75, KP-61V45 KP-61V75, KP-61V80, KP-61V85, KP-61XBR48 KP-61XBR200, KP-61XBR300, KP-65XBR10W KWP-65HD1H Subject: Essential boards used by the models in the Date: March 15, 2001 SAYS program Symptom: (XXXX) Need to know what boards are in the SAYS program NOTE: In order to qualify for the SAYS program, the above models must be: 1. Purchased after 6-1-98 and still under warranty. 2. Sold/used in the contiguous US. Solution: Please see the list below: Attention: Be sure to check the serial number of the unit before ordering the board. In some cases the board will be different depending on serial number ranges. KWP-65HD1 is not part of the SAYS program. But the boards are repaired under the SAYS program. Model Description Functionally P/N Chassis KP-41T35 A Board Tuner, AV, YCJ, Audio, V Out A-1298-072-A RA-2 CB Board B Out A-1331-672-A CG Board G Out A-1331-671-A CR BOARD R Out A-1331-670-A G Board Power Supply. H/V Wave Gen. RGB Conv A-1316-317-A Sub DY Drive HA Board In/Out Sel A-1372-304-A PT BOARD Digital Comb A-1190-265-A Filter, PIP Reference: PRINTED IN USA Model Description Functionally P/N Chassis RA-2 KP-41T35 ZR Board VM, DY A-1390-682-A ZG Board VM, DY A-1390-683-A KP-41T65 A Board Tuner AV,YCJ, Audio, V Out A-1298-448-A RA-2A CB Board B Out A-1331-779-A CG Board G Out A-1331-778-A CR Board R Out A-1331-777-A G Board Power Supply H/V Wave Gen. RGB Conv. Sub A-1316-367-A DY HA Board In/Out select A-1372-441-A PT Board Comb Filter/PIP A-1190-265-A Z Board DY/VM A-1390-826-A KP-41T65 SN 95xxxxx A Board Tuner AV,YCJ, Audio, V Out A-1298-655-A RA-2A CB Board B Out A-1331-813-A CG Board G Out A-1331-812-A CR Board R Out A-1331-811-A G Board Power Supply H/V Wave Gen. RGB Conv Sub A-1316-422-A DY HA Board In/Out select A-1372-474-A Z Board DY/VM A-1390-843-A KP-43T70 A Board Tuner, Audio A-1299-067-A RA-3 control, Video, Regi. Correction CB Board B Out A-1331-924-A CG Board G Out A-1331-923-A CR Board R Out A-1331-922-A G BOARD Power Supply, A-1316-475-A HV & DY Drives HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Focus Sensors A-1390-933-A KP-43T75 A Board Audio, system A-1298-864-A RA-3A control, video & reg. control CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A G Board Power Supply, H/V Output A-1316-475-A Model Description Functionally P/N Chassis KP-43T75 HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A KP-46C36 A Board Tuner, AV, YCJ, Audio, V Out A-1298-009-A RA-2 CB Board B Out A-1331-669-A CG Board G Out A-1331-668-A CR Board R Out A-1331-667-A G Board Power Supply. A-1316-295-A H/V Wave Gen. RGB Conv. HA BOARD In/Out Select A-1372-304-A P Board PIP & Chroma A-1195-103-A Decoder ZG Board VM, DY A-1390-682-A ZR Board VM, DY A-1390-682-A KP-46C65 Same as KP-41T65 except the following Board G BOARD Power Supply A-1316-365-A RA-2A KP-46C70 Same as KP-43T70 except the following Board G Board Power Supply, HV & DY Drives A-1316-509-A RA-3 KP-48S35 Same as KP-46C36 except for the following Board A BOARD Tuner, AV, YCJ, Audio, V Out A-1297-946-A RA-2 G Board Power Supply. H/V Wave Gen. R G B Conv. A-1316-304-A Sub DY Drive HA BOARD In/Out Select A-1372-288-A KP-48S65 Same as KP-41T65 except for the following Board KP-48S65R G Board Power Supply A-1316-367-A RA-2A KP-48S70 Same as KP-46C70 except for the following Board And KP-48S72R G Board Power Supply, HV & DY Drives A-1316-471-A RA-3 KP-48S75 A Board Audio, System, A-1298-864-A RA-3A Tuner, Video & Reg. Control. CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A Model Description Functionally P/N Chassis KP-48S75 G Board Power Supply, H/V Output A-1316-471-A RA-3A HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A Model Description Functionally P/N Chassis KP-48V45 Same as KP-41T35 except for the following Boards A Board A-1298-067-A A-1298-067-A RA-2 G Board Power Supply. H/V Wave Gen. RGB Conv. A-1316-314-A Sub DY Drive PV Board Digital Comb A-1190-264-A Filter, PIP KP-48V75 A BOARD Y/C/J, AV switch, Audio output, Vert output,Tuner, AV-IN/OUT A-1298-550-A RA-2A CB BOARD Blue Output A-1331-806-A CG BOARD Green Output A-133-1805-A CR BOARD Red Output A-133-1804-A G BOARD H/V Deflection, A-1316-388-A HV, Power Supply HA BOARD Video 2 input, A-1372-441-A SIRCS, Function Key PD BOARD Decoder, A-1190-317-A 3D comb filter, P&P controller U BOARD Video 4 input A-1373-667-A SIRCS IN/OUT Z BOARD DY/VM A-1390-826-A KP-48V80 A Board Tuner, Audio A-1299-051-A RA-3 control, Video, Regi. Correction CB BOARD B Drive A-1331-924-A CG Board G Drive A-1331-923-A CR Board R Drive A-1331-922-A G Board Power Supply, A-1316-471-A HV & DY Drives HA Board Control Switches A-1372-619-A HB-Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S BOARD Focus Sensors A-1390-933-A U Board Video/Audio A-1373-727-A IN/Out, Model Description Functionally P/N Chassis KP-48V85 A Board Audio, System, A-1298834-A RA-3A Tuner, Video & Reg. Control. CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A G Board Power Supply, H/V Output A-1316-471-A HA Board Control Switches A-1316-471-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A U Board SIRCS A-1373-727-A KP-53HS10 A Board Tuner, Main CPU, A-1299-141-A RA-4B OSD, Video, Sensor Amp. BA Board 3 D Comb Filter A-1131-461-A BD Board Conv. Registration A-1131-556-A BM Board Mid Controller A-1131-470-A BR Board TBC, Up A-1131-462-A Converter CB Board B CRT Board A-1331-974-A CG Board G CRT Board A-1331-973-A CR Board R CRT Board A-1331-972-A D Board Deflection, HV A-1346-873-A DS Board DF Control, A-1343-712-A RGB Shading G Board Power Supply. A-1316-513-A HA Board Function Keys A-1372-775-A HC Board SIRCS Receiver A-1372-776-A K Board Audio A-1380-624-A S Board Sensor A-1390-933-A U Board SIRCS Input/out A-1373-794-A ZB Board DY/VM A-1390-952-A ZG Board DY/VM A-1390-951-A ZR Board DY/VM A-1390-950-A KP-53N74 Same as KP-46C70 except the following Board A Board Tuner, Audio A-1298-981-A RA-3 control, Video, Reg. Correction Model Description Functionally P/N Chassis KP-53N77 A Board Audio, System, A-1298-981-A RA-3A Tuner, Video & Reg. Control. CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A G Board Power Supply, H/V Output A-1316-499-A HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A KP-53S35 Same as KP-46C36 except for the following Boards A Board Tuner, AV, YCJ, Audio, V Out A-1297-946-A RA-2 G Board Power Supply. H/V Wave Gen. RGB Conv . A-1316-295-A Sub DY Drive HA BOARD In/Out Select A-1372-288-A KP-53S65 Same as KP-41T65 except for the following Boards SN 90xxxxx G Board Power Supply. H/V Wave Gen. RGB Conv. A-1316-365-A RA-2A Sub DY Drive SN 91xxxxx G Board Power Supply. H/V Wave Gen. RGB Conv. A-1316-379-A Sub DY Drive KP-53S70 A Board Tuner, Audio A-1299-067-A RA-3 S/N90XXXXX control, Video, Reg. Correction CB Board B Drive A-1331-942-A CG Board G Drive A-1331-923-A CR Board R Drive A-1331-922-A G Board Power Supply, A-1316-509-A HV & DY Drives HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Focus Sensors A-1390-933-A KP-53S70 Same as KP-53S70 S/N9000001 except for the following Boards S/N95XXXXX A Board Tuner, Audio Reg. Correction A-1298-864-A RA-3 G Board Power Supply, HV out A-1316-499-A Model Description Functionally P/N Chassis KP-53S75 A Board Audio, System, A-1298-864-A RA-3A Tuner, Video & Reg. Control. (Ser.No. 900-) CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A G Board Power Supply, A-1316-437-A H/V Output A-1316-499-A (Ser. No. 950-) HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A KP-53V45 Same as KP-41T35 except for the following Boards A Board Tuner, AV, YCJ, Audio, V Out A-1298-067-A RA-2 G Board Power Supply. A-1316-313-A H/V Wave Gen. PV Board Digital Comb Filter, PIP A-1190-264-A KP-53V75 Same as KP-48V75 except for the following Board G Board H/V Deflection, HV, Power Supply A-1316-376-A RA-2A KP-53V80 Same as KP-48V80 except for the following Boards A Board Tuner, Audio A-1298-843-A RA-3 control, Video, Regi. Correction G Board Power Supply, A-1316-437-A HV & DY Drives KP-53V85 A Board Audio, System, A-1298-843-A RA-3A Tuner, Video & Reg. Control. CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A G Board Power Supply, H/V Output A-1316-437-A HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A Model Description Functionally P/N Chassis KP-53XBR45 AA Board Audio, H Drive, H Out A-1297-540-A RA-1 AB Board Tuning micron. A-1297-539-A System Control CB Board B Out A-1331-503-A CG Board G Out A-1331-502-A CR Board R Out A-1331-501-A D Board RGB Conv. Corr. A-1346-537-A V Out Sub DY Drive E Board H Phase, HV Ref A-1341-885-A HV Det. HV Reg.-Det. G Board Power Supply A-1316-229-A GB Board Audio P/S A-1311-436-A HA Board LED/ SIRCS A-1372-140-A HB Board Video 2 in A-1372-141-A K Board Audio A-1380-499-A M Board Y/C/J A-1306-507-A PLL Control P5 Board Comb Filter A-1195-092-A U Board AV Switch A-1373-526-A X Board MPX, PIP, XDS, A-1394-673-A OSD Mixer ZB Board VM, DY A-1390-491-A ZG Board VM, DY A-1390-489-A ZR Board VM, DY A-1390-487-A KP-53XBR200 A Board Main CPU, AV sw A-1298-500-A RA-4 OSD CPU, 3D comb filter, Tuner BD Board Registration D/A A-1131-321-A converter 1, BM Board Main/Sub, ADC & A-1131-320-A CPU, Mid controller, PLL BR Board TBC, Up & A/D A-1131-319-A converter CB Board Blue CRT Board A-1331-783-A CG Board Green CRT Board A-1331-782-A CR Board RED CRT Board A-1331-781-A D Board H/V Def. Sub DEF, A-1343-477-A HV Reg. D. F. shading G Board Power Supply A-1316-400-A Model Description Functionally P/N Chassis KP-53XBR200 HA Board Function Keys A-1372-448-A RA-4 HB Board Video 2 input A-1372-449-A HC Board SIRCS Receiver A-1372-450-A K Board Audio Amp, Tone A-1380-573-A control, Pro logic Decoder U Board SIRCS In/Out A-1373-675-A ZB Board Blue DY/VM A-1390-836-A ZG Board Green DY/VM A-1390-835-A ZR Board Red DY/VM A-1390-834-A KP-53XBR300 A Board Tuner, AV Sw., A-1298-973-A RA-4A Jungle, Video, I/O, YUV Sw., Chroma Dec. CPU, OSD Reg. Sensor BA Board 3 Comb Filter A-1131-461-A BD Board Digital Reg. A-1131-460-A BM Board MID A-1131-470-A BR Board DRC A-1131-462-A CB Board B CRT Board A-1331-974-A CG Board G CRT Board A-1331-973-A CR Board Red CRT Board A-1331-972-A D Board Deflection HV Reg. A-1343-771-A D. F. Shading DS Board Shading A-1343-712-A G Board Power Supply A-1316-400-A HA Board Function Key A-1372-448-A HB Board Video 2 input A-1372-449-A HC Board SIRCS Receiver A-1372-450-A K Board Audio Amp, Dolby A-1380-618-A U Board SIRCS I/O, DTV A-1373-761-A HD/VD Input ZB Board Blue DY, I/F A-1390-952-A ZG Board Green DY, I/F A-1390-951-A ZR Board Red DY, I/F A-1390-950-A KP-57XBR10W A Board Main CPU, AV A-1299-347-A RA-4W SW., OSD CPU, Chroma, Tuner, Video Input, OSD Processor, Video Processor, Sensor Amp.. BA Board 3 Comb Filter A-1131-461-A BD Board Digital Reg. A-1131-650-A BM Board MID, Sub ADC A-1131-648-A BR Board DRC, MID A-1131-649-A Model Description Functionally P/N Chassis KP­57XBR10W CG Board G CRT Board A-1332-143-A RA-4W CR Board Red CRT Board A-1332-142-A D Board Deflection HV Reg. A-1346-994-A D. F. Shading G Board Power Supply A-1316-552-A HA Board Function Key A-1372-897-A HB Board Video 2 input A-1372-898-A HC Board SIRCS Receiver A-1372-900-A HD Board Power Sw. A-1372-899-A K Board Audio, Prologic A-1380-643-A- S Board Sensor A-1390-933-A U Board SIRCS In/Out A-1373-761-A ZB Board DY/ VM A-1391-098-A ZG Board DY/ VM A-1391-097-A ZR Board DY/ VM A-1391-096-A KP-53XBR300 K Board Audio Amp, Dolby A-1380-618-A RA-4A U Board SIRCS I/O, DTV A-1373-761-A HD/VD Input ZB Board Blue DY, I/F A-1390-952-A ZG Board Green DY, I/F A-1390-951-A ZR Board Red DY, I/F A-1390-950-A KP-61HS10 Same as KP-53HS10 except for the following Board D Board Deflection, HV A-1346-899-A RA-4B KP-61S35 Same as KP-46C36 except for the following Boards A Board Tuner, AV, YCJ, Audio, V Out A-1297-946-A RA-2 G Board Power Supply. A-1316-304-A H/V Wave Gen. RGB Conv. HA BOARD In/Out Select A-1372-288-A KP-61S65 Same as KP-41T65 except for the following Board RA-2A G Board Power Supply A-1316-367A KP-61S70 Same as KP-46C70 except for the following Boards RA-3 G Board Power Supply, A-1316-471-A HV & DY Drives KP-61S75 A Board Audio, System, A-1298-864-A RA-3A Tuner, Video & Reg. Control. (Ser. No. 900-) CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A G Board Power Supply, A-1316-471-A H/V Output A-1316-498-A (Ser. No. 950-) Model Description Functionally P/N Chassis HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A KP-61V45 Same as KP-41T35 except for the following Boards RA-2 A Board Tuner, AV, YCJ, A-1298-067-A Audio, V Out G Board Power Supply. A-1316-314-A PV Board Comb Filter, PIP A-1190-264-A KP-61V75 Same as KP-48V75 RA-2A KP-61V80 Same as KP-53V80 except for the following Board RA-3 G Board Power Supply, A-1316-498-A HV & DY Drives KP-61V85 RA-3A A Board Audio, System, A-1298-843-A Tuner, Video & Reg. Control. CB Board Blue Drive A-1331-924-A CG Board Green Drive A-1331-923-A CR Board Red Drive A-1331-922-A G Board Power Supply, A-1316-471-A H/V Output HA Board Control Switches A-1372-619-A HB Board Menu Switches A-1372-620-A HC Board Remote Sensor A-1372-618-A S Board Sensor A-1390-933-A U Board SIRCS A-1373-727-A KP-61XBR48 Same as KP-53XBR45 except for the following Boards RA-1 AA Board Audio, H Out A-1297-622-A K Board Audio A-1380-498-A KP-61XBR200 Same as KP-53XBR200 except for the following Board RA-4 D Board Deflection, HV A-1343-476-A Reg, DF. Shading KP-61XBR300 Same as KP-53XBR300 except for the following Board RA-4A D Board Deflection, HV A-1343-772-A Reg., DF, Shading KP-65XBR10W Same as KP-57XBR10W RA-4W KWP-65HD1 is not part of the SAYS program. But the boards are repaired under the SAYS program. Model Description Functionally P/N Chassis KWP-65HD1 A Board Main CPU, AV Sw., A-1298-773-A DR-1 OSD CPU, 3 D Comb Filter, Chroma, Tuner, Video Input, Video & OSD Processors. AW Board Auto Wide A-1294-476-A BD Board Digital Registration A-1131-395-A BM Board Main/Sub ADC, A-1131-397-A MID CPU, MID Controller, PLL BR Board TBC, A-1131-396-A UP CONVERTER A/D CONVERTER CB Board Blue Drive A-1331-982-A CG Board Green Drive A-1331-981-A CR Board Red Drive A-1331-980-A D Board H/V Def, Sub Def, A-1343-620-A HV Reg., Shading/ G Board Power Supply A-1316-444-A GA Board AC Line A-1311-733-A HA Board Control Switches A-1372-590-A HB Board Video 2 Input A-1372-592-A HC Board Remote Sensor A-1372-591-A K Board Audio Amp, A-1380-573-A Prologic UA Board DTV AMP. A-1373-719-A UB Board SIRCUS In/OUT, A-1373-720-A Video Input ZB Board DY/ VM A-1390-960-A ZG Board DY/ VM A-1390-959-A ZR Board DY/ VM A-1390-958-A ************************************************************************