Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR61, TR65 No. 355 Subject: Drum Motor noise may be heard / use cushion Date: September 28, 1994 3-956-191-01 Symptom: (64) Drum Motor noise may be picked up by the internal microphone. If this symptom occurs, the cushion from the CCD-TR91 can be cut to size and added. Solution: Reference: AP-GK-091994 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Filename: Directory: Template: Title: Subject: Author: Keywords: Comments: Creation Date: Revision Number: Last Saved On: Last Saved By: Total Editing Time: Last Printed On: CAM0355.SB J:\SBDOC\SEP94 C:\WINWORD\S_BULL.DOT Hoyt Wing Lee 09/28/94 1:22 PM 2 09/28/94 1:22 PM Hoyt Wing Lee 0 Minutes 04/01/96 11:01 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 117 (approx.) Number of Characters: 671 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: RM-E700 No. 356 Subject: Malfunction of Editing when using EV-S7000 Date: November 16, 1994 Symptom: (**) During program editing, when an EV-S7000 is used for the player and the recorder is infrared controlled, three to four of the thirty cuts may be skipped without any recording. Solution: Replace IC-206 on the MC-67 board with the following improved part: REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER IC206 CXP80116-842Q 8-752-831-99 CXP80P116Q-2-254 8-752-839-24 Reference: FPR-PV945059 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Filename: CAM0356.SB Directory: J:\SBDOC\NOV94 Template: C:\WINWORD\S_BULL.DOT Title: rm-e700 MISSING EDITS WHEN USED WITH ev-S7000 Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 11/16/94 2:44 PM Revision Number: 2 Last Saved On: 11/16/94 2:44 PM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 10:08 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 136 (approx.) Number of Characters: 776 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: MPK-TR No. 357 Subject: Part Number Information: Base Block Assy, RC-42 Date: November 17, 1994 MCB Symptom: (**) Please correct the following part numbers on page 17 of the service manual. Solution: Please note the correct part number as shown below. Reference: FPR-PV01394 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Filename: CAM0357.SB Directory: J:\SBDOC\NOV94 Template: C:\WINWORD\S_BULL.DOT Title: MPK-TR part number correction Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 11/17/94 9:26 AM Revision Number: 2 Last Saved On: 11/17/94 9:26 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 10:08 AM As of Last Complete Printing Number of Pages: 1 Number of Words: 130 (approx.) Number of Characters: 741 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR700 No. 358 Subject: Change of drop-out compensation when using ME Date: November 18, 1994 tape. Symptom: (34) Variations in ME tape may cause drop-outs noticeable as over modulation noise. If this symptom occurs, please perform the following improvements to the VS-99 board. Solution: Change the values of C239 and R161 as indicated, add a 1000pF capacitor across the pads where R157 should be mounted, and remove R240 REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER C239 0.47µF/25V 1-135-145-11 1µF/16V 1-135-091-00 R157 NOT MOUNTED 1000PF 1-162-964-11 R161 10K. 1-216-864-11 100K. 1-216-845-11 R240 REMOVE IF INSTALLED (Continued) Reference: PV-945057 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Video Products Service Bulletin No.358 Video Products Service Bulletin No.358 Filename: Directory: Template: Title: Subject: Author: Keywords: Comments: Creation Date: Revision Number: Last Saved On: Last Saved By: Total Editing Time: Last Printed On: CAM0358.SB J:\SBDOC\NOV94 C:\WINWORD\S_BULL.DOT Hoyt Wing Lee 11/18/94 2:29 PM 2 11/18/94 2:29 PM Hoyt Wing Lee 1 Minute 04/01/96 10:08 AM As of Last Complete Printing Number of Pages: 3 Number of Words: 190 (approx.) Number of Characters: 1,085 (approx.) ************************************************************************ 5 Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: SB-V500 No. 360 Subject: No Power Date: November 21, 1995 Symptom: (11) No power because diode D907 opens. Solution: Replace D907 on VA-60 board with improved part as shown below. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER D907 DIODE 1SS119 8-719-911-19 DIODE 10E2 8-719-200-02 Reference: FPR-P PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR65, TR91, TR300, TR500 No. 363 Subject: Users wearing eyeglasses may see reflections in Date: November 18, 1994 viewfinder / install A-7092-185-A Symptom: (**) When using the camcorder outdoors, customers wearing eyeglasses may see reflections from the sun in the color LCD viewfinder. This may make the viewfinder picture difficult to see. Solution: If a customer complains of this symptom, install the Eye Cup Set as shown. How to install: Reference: PV-945020 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Filename: Directory: Template: Title: Subject: Author: Keywords: Comments: Creation Date: Revision Number: Last Saved On: Last Saved By: Total Editing Time: Last Printed On: CAM0363.SB J:\SBDOC\NOV94 C:\WINWORD\S_BULL.DOT Hoyt Wing Lee 11/18/94 2:26 PM 2 11/18/94 2:26 PM Hoyt Wing Lee 0 Minutes 04/01/96 10:10 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 140 (approx.) Number of Characters: 802 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR101 No. 364 Subject: EVF interior may be damaged by sun/attach Date: November 18, 1994 protector 3-957-933-01 Symptom: (14) The interior of the viewfinder may be damaged by the sun being focussed on to the plastic through the eyepiece. If this occurs, replace any damaged cabinet parts, and attach the VF protector as shown. Solution: Peel the backing from the VF protector and attach as shown. Reference: PV-945017 PRINTED IN USA Autoflagged - YES PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Filename: Directory: Template: Title: Subject: Author: Keywords: Comments: Creation Date: Revision Number: Last Saved On: Last Saved By: Total Editing Time: Last Printed On: CAM0364.SB J:\SBDOC\NOV94 C:\WINWORD\S_BULL.DOT Hoyt Wing Lee 11/18/94 2:52 PM 2 11/18/94 2:52 PM Hoyt Wing Lee 1 Minute 04/01/96 10:10 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 131 (approx.) Number of Characters: 748 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR31 No. 365 Subject: Drum Driver IC408 Change Date: November 18, 1994 Symptom: (**) The Drum Driver IC (IC408) has been changed from a MCD004BM to a CXA1575M. Please note that the following circuit changes have been made in production: Solution: REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER IC408 IC - MCD004BM 8-759-057-60 IC - CXA1575M 8-759-169-11 C456 0.1µF 1-164-633-11 0.22µF 1-163-037-11 C464 3.3µF 1-135-180-21 0.1µF 1-163-077-00 C473 0.047µF 1-165-176-11 OMITTED R468 390. 1-216-039-00 56. 1-216-019-00 R469 27K. 1-216-838-11 OMITTED R470 27K. 1-216-838-11 OMITTED R471 27K. 1-216-838-11 OMITTED R472 10K. 1-216-833-11 3.3K 1-216-827-11 R473 10K. 1-216-833-11 OMITTED R495 ADDED 0. 1-216-864-11 (Continued) Reference: PV-945056 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Camera/Camcorder Service Bulletin No.365 (Continued) Camera/Camcorder Service Bulletin No.365 Filename: Directory: Template: Title: Subject: Author: Keywords: Comments: Creation Date: Revision Number: Last Saved On: Last Saved By: Total Editing Time: Last Printed On: CAM0365.SB J:\SBDOC\NOV94 C:\WINWORD\S_BULL.DOT Hoyt Wing Lee 11/18/94 2:18 PM 2 11/18/94 2:18 PM Hoyt Wing Lee 1 Minute 04/01/96 10:10 AM As of Last Complete Printing Number of Pages: 3 Number of Words: 251 (approx.) Number of Characters: 1,436 (approx.) ************************************************************************ 5 Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-FX430, FX435, FX630 No. 366 Subject: Erratic Capstan Motor Operation / Resolder IC505 Date: November 21, 1995 Symptom: (62) Some initial production units of the CCD-FX430/435 and CCD-FX630 may exhibit various servo and syscon related problems. Symptoms may be capstan motor running in reverse, erratic capstan motor operation, and no video record. Solution: As a precaution, please resolder ALL pins on IC505 on these models brought in for service. Affected serial number range for the CCD-FX430/FX435 is 1000001 to 1010000. For the CCD-FX630, no action is necessary after serial number 70700. Reference: TF103R1 PRINTED IN USA Autoflagged - YES PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: GEN-CAM No. 367 Subject: Availabilty of Camcorder Battery Connection Jig/ Date: December 27, 1994 J-6082-313-A Symptom: (**) A jig is now available to easily connect a dc power supply to camcorders using rear­mounted battery connections. Full instructions are included with the jig. Solution: Reference: AP120294 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Audio Products Service Bulletin No. xxx ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-F301, CCD-F302, CCD-F401, CCD- No. 368 F402 Subject: Notes for replacement of VC-94 and CD-58 boards. Date: January 9, 1995 Symptom: (**) The VC-94 board and the CD-58 board have been changed. Solution: Care must be taken when replacing these boards. The combinations and notes for board replacement are as follows. VC-94 BOARD: The former board will continue to be stocked as a replacement part. The updated (-B) board has a new revision of IC301 (which has a buffer added) and Q657 and Q658 have been removed. The -B board may be used as a replacement for any board serial number, but the -A (former) board can only be used as a replacement for units with board serial numbers less than -12 suffix. For replacement of IC301 see table below. FORMER VC-94 Board NEW VC-94 Board MODEL PART NUMBER BOARD NUMBER PART NUMBER BOARD NUMBER CCD-F301/F302 A-7062-607-A UP TO AND A-7062-607-B FROM 1-638-463-13 INCLUDING AND UP 1-638-463-12 CCD-F401/F402 A-7062-633-A UP TO AND A-7062-633-B FROM 1-638-463-13 INCLUDING AND UP 1-638-463-12 REFERENCE NUMBER FORMER PART (NO BUFFER) NEW PART (BUFFER ADDED) IC301 MB88341BPFV (8-759-946-00) M62352GP or USED IN ** MB88346BPFV A-7062-607-A (8-759-064-36) or A-7062-633-A USED IN A-7062-607-B or A-7062-633-B ** Denotes this part is used for repair. M62352GP is supplied with the board only and is not available as a repair part. Reference: PV-945009 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Camera/Camcorder Service Bulletin No. 368 Continued CD-58 BOARD: The FORMER board (-A) can directly replace a NEW (-B) board. However when a NEW board is being used to replace a FORMER board the following steps must be observed: 1) Replace IC301 with new part MB88346BPFV (8-759-064-35) 2) If Q303 is mounted it should be removed FORMER CD-58 Board NEW CD-58 Board MODEL PART NUMBER BOARD NUMBER PART NUMBER BOARD NUMBER CCD-F301/F302 A-7062-608-A UP TO AND INCLUDING 1-638-461-13 A-7062-608-B FROM 1-638-461-14 AND UP CCD-F401/F402 A-7062-634-A UP TO AND INCLUDING 1-638-461-13 A-7062-634-B FROM 1-638-461-14 AND UP Camera/Camcorder Service Bulletin No. 368 ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-F30, V5, V9 No. 369R1 Subject: Lens Repair Procedure - AF Block Date: February 15, 1996 Symptom: (**) No, intermittent, or inaccurate auto focus. Cause is probably the connection between the AF CCD imager and flex connector. A kit is available to address this problem (A-7030-620-A). Please refer to the "New Theory For Technical Servicing (Revised)" manual, part number 9-972-880-12 for the procedure. A video tape demonstrating the procedure is also available. Solution: Recommended equipment: REF DESCRIPTION PART NUMBER FOCUS SENSOR KIT A-7030-620-A EXTENDER J-6082-034-A CAMERA FIXING JIG J-6080-867-A LENS MANUAL 9-972-880-12 LENS BLOCK REPAIR VIDEO TAPE T-LENS2-95 1. For easy connection of the lens assembly to a power source, prepare aJ-6082-034-A extender as follows: Plug the extender into CN2 of the AF-32 board, conductor side up. Reference: AP030195 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Camera/Camcorder Products Service Bulletin No. 369 2. For easy connection of the oscilloscope probe to CN1, use a probe equipped withmini-grabber tips. Pins 1 and 3 of CN1 can be accessed easily. 3. Attach the lens assembly to a tripod using the Camera Fixing Jig J-6080-867-A.Use a P2X14 screw to attach the lens to the Jig. (One of the screws which attaches the CCD Imager to the lens can be used). AVAILABILITY OF LENSES AND AF CCD’S A limited supply of Lens Assemblies (1-547-264-11) and AF CCD’s (T-9985-710-1) are currently available. A complete Lens Assembly should only be used if repair is not possible. Once the current inventory of Lenses is depleted, there will be no more availability. Likewise, the availabiltiy of the AF CCD is very limited. Use only if necessary. Previously, Technical Specialist or Technical Representative authorization was needed to obtain these parts. This is no longer necessary. REF DESCRIPTION PART NUMBER AF CCD SENSOR ASSY T-9985-710-1 LENS ASSEMBLY 1-547-264-11 ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: RM-E1000T No. 370 Subject: V Jitter at title insert Date: March 20, 1995 Symptom: (33) When the title is turned ON or OFF, V jitter may occur on certain monitors or televisions. (This is caused by the difference in voltage between the through output when turned OFF and the superimpose output when turned ON). If this symptom occurs, perform the following modification. Solution: A modification to the, AV-26 board, using the following parts must be performed: REF DESCRIPTION PART NUMBER 68 OHM RESISTOR 1-249-403-11 1 K OHM RESISTOR 1-216-049-00 1. The traces for Q544 collector must be cut in the locations shown in figures 1 and 2. 2. Connect through-holes A and B with a piece of wire. 3. Solder 1K resistor across C541 so they are in parallel. 4. Solder 68 ohm resistor as shown in figure 3 Reference: PV-955004 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Filename: CAM0370.SB Directory: J:\SBDOC\MAR95 Template: C:\WINWORD\S_BULL.DOT Title: RM-E1000T vertical jitter Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 03/20/95 9:56 AM Revision Number: 2 Last Saved On: 03/20/95 9:56 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 1 Minute Last Printed On: 04/01/96 9:31 AM As of Last Complete Printing Number of Pages: 1 Number of Words: 180 (approx.) Number of Characters: 1,028 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: RM-E1000T No. 371 Subject: Audio noise generated with MIC connected Date: March 20, 1995 Symptom: (54) When a microphone is connected and the MIC level is increased 50% or more, the audio output may be noisy. Solution: Perform the following modification to the "B" side of the FL-59 board (see Fig.1. and page 4-37 location D-6 and E-8): 1.Cut patterns leading to grounding pin of J303. 2.Cut pattern leading to pin 2 of W104. 3.Connect J303 grounding pin and W104 pin 2 with approximately 2 inches of lead wire (AWG #26 or equivalent) as shown. NOTE: There are one or two pattern cut locations depending on the board suffix numbers. Shown is the pattern for suffixes -13, -14, -21 and -22. Reference: PV-945050 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Filename: CAM0371.SB Directory: J:\SBDOC\MAR95 Template: C:\WINWORD\S_BULL.DOT Title: RME1000t audio noise Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 03/20/95 9:58 AM Revision Number: 2 Last Saved On: 03/20/95 9:58 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 9:32 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 164 (approx.) Number of Characters: 937 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-FX230, FX310, FX330, FX410, FX420, FX430, FX510, FX520, FX530, No. 373 FX620, FX630, FX710, FX730V, TR21, TR30, TR40, TR61, TR65, TR70, TR80, TR400, VX3. Subject: Premature Tape End Indication Date: March 20, 1995 Symptom: (22) Premature Tape End indication - all other mechanical functions are normal (all "A" Mechanism Models). Solution: (Component Designation from CCD-TR40/TR70/TR80/TR400. Other models may have different designations). Unplug connector CN502 on the SL-38 board from the "A"-Mech, and apply a thin layer of FL OIL Grease to the contacts with a cotton swab. Re-seat the connector. Reference: PV-955009 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Audio Products Service Bulletin No. xxx Filename: Directory: Template: Title: Subject: Author: Keywords: Comments: Creation Date: Revision Number: Last Saved On: Last Saved By: Total Editing Time: Last Printed On: CAM0373.SB J:\SBDOC\MAR95 C:\WINWORD\S_BULL.DOT Hoyt Wing Lee 03/20/95 8:29 AM 2 03/20/95 8:29 AM Hoyt Wing Lee 0 Minutes 04/01/96 9:31 AM As of Last Complete Printing Number of Pages: 3 Number of Words: 161 (approx.) Number of Characters: 922 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: RM-95 No. 375 Subject: Ejecting camcorders using an RM-95 Date: July 18, 1995 Symptom: (**) There is currently no way a technician can eject a camcorder using an RM­ 95. This procedure will modify an existing RM-95, and allow a technician toeject some mechanisms with the cabinet’s function buttons removed. Solution: This modification will work on most of the “FX” model camcorders and some of the “TR” camcorders. As a rule, if the cabinet eject button is under a switch block assembles lid, the eject modification will not work for that model. This procedure allows the technician to eject the mechanism, of certain model camcorders, utilizing the RM-95 adjustment remote. The black button to the right of the VTR record button will now be used for mechanism eject. The VTR record function will be activated by pressing just the red record button, not the simultaneous red record and black safety button. Up to now there was the ability to operate most other functions of the camera, except for eject. The advantage to the technician in the field is, they will now have the ability to fully service the camcorder with the function button cabinet removed, thus allowing them to load and unload various test tapes. Procedure 1. Disassemble the RM-95 by removing the three rear cabinet screws. 2. Referring to the diagram, drill two holes, in the locations shown, on the PC board. NOTE: Holes should be drilled, from the IC (Reverse) side of the PC Board to prevent severing of lands. 3. Solder the Cathode of the diode, to pin 61 of IC 4 NOTE: Either one of these two diodes can be used for this procedure: 1) 8-719-404-46 (Diode code stamped “1A”) 2) 8-719-016-74 (Diode code stamped “1B”) 4. Cut the two lands shown in the diagram. 5. Scrape and tin the four cut junctions. 6. Using thin tone arm wire, jumper the two connections that go to the VTR record switch. 7. Run a jumper from the top land of the eject switch, to pin 16 of IC 4. 8. Run another jumper from the bottom land of the eject switch, to the anode of the diode. Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Camera Camcorder Service Bulletin No. 375 9. Reassemble the RM-95 and install the three screws. (Continued) Camera Camcorder Service Bulletin No. 375 Filename: CAM0375.SB Directory: J:\SBDOC\JUL95 Template: C:\WINWORD\TEMPLATE\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 07/18/95 9:24 AM Revision Number: 2 Last Saved On: 07/18/95 9:24 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 1 Minute Last Printed On: 04/01/96 8:55 AM As of Last Complete Printing Number of Pages: 3 Number of Words: 370 (approx.) Number of Characters: 2,111 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR70/80 No. 376 Subject: Caution when replacing VF-67 board. Date: July 18, 1995 Symptom: (31) After replacing the VF-67 board, there is no EVF video or backlight. The backlight will come on, when CN901 is disconnected. Solution: IC903 on the VF-67 board is an EVR, (D to A converter) with internal memory storage. The data is stored in Page D; Address B0 to BB. You should make a note of the old data, from address B0 to BB, prior to replacing this board. If the data is unreadable you should input service manual initial data (Page 7­54), Then perform EVF adjustments, using section 1-4 of the “Adjustments” section of the service manual. Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Filename: CAM0376.SB Directory: J:\SBDOC\JUL95 Template: C:\WINWORD\TEMPLATE\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 07/18/95 10:16 AM Revision Number: 2 Last Saved On: 07/18/95 10:16 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 8:55 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 156 (approx.) Number of Characters: 894 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: "A" MECHANISM No. 379 Subject: Noise when in REW or FF Date: July 18, 1995 Symptom: (62) The Relay Pulley touches the Arm Ass’y GL when in REW or FF, and it may be a cause to make a noise. Solution: Install the following improved part. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER 313 ARM ASS'Y, GL X-3941-258-1 ARM ASS'Y, GL X-3941-258-3 Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Filename: CAM0379.SB Directory: J:\SBDOC\JUL95 Template: C:\WINWORD\TEMPLATE\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 07/18/95 9:35 AM Revision Number: 2 Last Saved On: 07/18/95 9:35 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 1 Minute Last Printed On: 04/01/96 8:57 AM As of Last Complete Printing Number of Pages: 1 Number of Words: 115 (approx.) Number of Characters: 658 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: "A" MECHANISM No. 382 Subject: Gear (B), L Tooth Crack Date: July 18, 1995 Symptom: (63) If the LS chassis is over loaded, Gear (B), L may crack and this may cause a no mechanical operation. Solution: Replace the old part with the new improved part listed in the below chart. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER 319 GEAR (B), L 3-945-697-01 (WHITE) GEAR (B), L 3-945-697-03 (LIGHT BROWN) Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Filename: CAM0382.SB Directory: J:\SBDOC\JUL95 Template: C:\WINWORD\TEMPLATE\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 07/18/95 9:50 AM Revision Number: 2 Last Saved On: 07/18/95 9:50 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 8:57 AM As of Last Complete Printing Number of Pages: 1 Number of Words: 123 (approx.) Number of Characters: 705 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: "A" MECHANISM No. 387 Subject: Screw Replacement ("A" Mechanism) Date: July 18, 1995 Symptom: (**) Various M1.4mm X 2.5 screws become loose and/or fall out of the mechanism. Solution: Whenever repairing the “A” mech, check whether any of the 14 screws indicated below are loose or missing. If any are loose and/or missing replace all 14 screws that are 1.4mm wide with 1.6mm wide screws, part # 3-962-346- Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx 01 Audio Products Service Bulletin No. xxx Filename: CAM0387.SB Directory: J:\SBDOC\JUL95 Template: C:\WINWORD\TEMPLATE\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 07/18/95 10:20 AM Revision Number: 2 Last Saved On: 07/18/95 10:20 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 1 Minute Last Printed On: 04/01/96 8:58 AM As of Last Complete Printing Number of Pages: 3 Number of Words: 122 (approx.) Number of Characters: 697 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-V5000 No. 388 Subject: Replacement of EVF CRT Holder Date: July 31, 1995 Symptom: (**) Two EVF types are being used: The former type has a square CRT, the new type has a cylindrical CRT. When either the Upper CRT Holder (X 3742 703 1) or the Lower CRT Holder (X 3742 704 1) needs replacement, use the parts contained in the EVF Parts KIT (A 7019 544 A). The original parts are no longer available. Solution: Either Install the EVF Parts kit listed below or perform Camera SB 385 which involves modifying the new type EVF CRT Holder to fit the old style CRT. EVF Parts Kit (A-7019-544-A) REF # Description C908 0.0039µF Chip Ceramic Capacitor DY Deflection Yoke R911 33 K. Resistor R912 0 . Resistor RV901 Variable Resistor (Focus) T901 Flyback Transformer V901 CRT (Cylindrical) 460 CRT Retainer 461 CRT Fixing Ring (M) 462 CRT Cover (M) 464 CRT Holder (Upper) Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Camera/Camcorder Products Service Bulletin No. 388 Filename: CAM0388.SB Directory: J:\SBDOC\JUL95 Template: C:\WINWORD\TEMPLATE\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 07/31/95 9:27 AM Revision Number: 2 Last Saved On: 07/31/95 9:27 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 8:59 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 203 (approx.) Number of Characters: 1,159 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-SC5 No. 390 Subject: Poor Friction of the LCD Tilt Ass'y Date: July 18, 1995 Symptom: (**) LCD Ass’y looses friction due to insufficient damping of the shaft. Solution: Replace the following part with the improved part. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER 18 TILT ASS'Y X-3943-397-1 TILT ASS'Y X-3943-397-3 Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx Filename: CAM0390.SB Directory: J:\SBDOC\JUL95 Template: C:\WINWORD\TEMPLATE\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 07/18/95 10:25 AM Revision Number: 2 Last Saved On: 07/18/95 10:25 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 9:00 AM As of Last Complete Printing Number of Pages: 2 Number of Words: 113 (approx.) Number of Characters: 646 (approx.) ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR40 No. 391 Subject: Notes For Replacement of PC Boards Date: August 9, 1995 Symptom: (**) The name of boards and their part numbers have been changed. When replacing boards, the following combinations should be observed. Reference: PV-955025 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR700 No. 392 Subject: Zoom Function Does Not Work Date: August 9, 1995 Symptom: (**) Due to *Silver Migration of the zoom switch, the zoom may not function. *Silver Migration - Moisture damage to a Silver plated part. Solution: Replace old part with the new part listed below. REF FORMER NEW DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER 67 PUSH SWITCH (ZOOM) 169225741 PUSH SWITCH (ZOOM) 169225742 Reference: PV-955030 PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER ************************************************************************ Camera/Camcorder Service Bulletin Sony Service Company -Technical Services A Division of Sony Electronics Inc. Sony Drive, Park Ridge, New Jersey 07656 CSV-3 Model: CCD-TR500 No. 393 Subject: Addition Cushion For LD-66 Used To Stop The Date: August 9, 1995 Board From Dislodging Symptom: (**) The connectors which plugs the LD-66 board and the VC-137 board, disconnects if the unit is bumped or dropped. The dislodged boards will cause no video. Solution: Add the cushion as the diagram shows. Reference: FPR- PRINTED IN USA Autoflagged - NO PRINTED ON RECYCLED PAPER Audio Products Service Bulletin No. xxx ************************************************************************